Enable and Disable DHCP on windows 8 ? | Through this post, I am going to tell you with complete details about how to enable DHCP and how to disable it. So that you can easily enable DHCP.
Enabling DHCP on windows 8:-
The Dynamic Host Configuration of Workstations or PCs with unique IP address. Thus, it simplifies IP address administration in the TCP/IP internetworking enviroment. DHCP overcomes one of the main drawbacks of manual assignment of IP address, which is related to the duplication of IP address assignment.
Enable and Disable DHCP on Windows 8:-
Enable DHCP on Windows 8:-
1:- Press Windows Key + X on windows 8 to open the power menu, and then choose the Control Panel option.
The Control Panel windows appears, showing the Home screen where you can adjust your computer’s setting. By default, all the items are displayed in the Category view.
2:- Click the Network and Internet Category.
3:- Click the Network and Sharing Center link to change network setting on your computer, You will see basic information about your network.
Also Read:-
4:- On the left side, click the Change adapter setting link, This opens the Network connections window, where you can change network setting and disable network devices.
5:- Right-Click on the Ethernet network and select the Properties options in the context menu.
6:- On the Networking tab, select Internet Protocol Version 4 (TCP/IP) and then click the properties button.
The Internet Protocol Version 4 Properties dialog box appears in which you can specify setting to assign IP address automatically.
Also Read :-
- What is computer network and computer network terminologies?
- What is Data Transmission? Types of Data Transmission.
7:- Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons.
8:- Click on the OK button.
This sets up the IP address and DNS server address to be assigned automatically, that is, DHCP will now be activited on your computer.
Also Read:-
Disable DHCP on Windows 8:-
However, If you want to disable DHCP, you can takes following steps:-
1:- Select the following radio button for the IP address.
2:- Enter the appropriate values for IP address, Subnet mask and default gateway setting.
3:-Select the following radio button for DNS addresses.
4:- Enter the values for Preferred DNS Server and Alternate DNS server.
5:- Click the OK button.
I hope you liked Enable and Disable DHCP on windows 8 ? this post very much. If you want to get posts on the same side, you can follow us on social media. So that you can get the Notification of our post first.
Also Read:-
Thank you very much for your valuable time.
Leave a Reply